Connect with us

E-Business

LG Electronics Offers Smart HVAC Solution for African Market

Published

on

Kindly share this post

Companies that provide heating, ventilation and air conditioning (HVAC) solutions know it’s crucial to offer products that meet the climate control needs of the respective audiences.

LG Electronics has its Multi V system available in the African markets and representatives say it’s ideal for the region, especially considering that some areas get temperatures upwards of 120 degrees Fahrenheit.

LG design its Multi V unit to address the needs of commercial clients, such as apartment building managers or people who oversee office complexes.

Customizable Coolness for Each Room

The Multi V is a variable refrigerant flow (VRF) system, which means it uses refrigerant for both heating and cooling purposes. A VRF system has an outdoor condenser unit, then an indoor unit in each room requiring climate control.

Manipulating the flow of refrigerant solution through the evaporator coils of the indoor units keeps each room at the desired temperature while using less energy than traditional systems that circulate chilled air or water through ducts in a building.

VRF systems still rely on air or water for cooling, but the changeable flow of the refrigerant results in energy-saving benefits. More specifically, they are 20-30% more efficient than conventional HVAC systems.

Standout Qualities of the System

Besides Multi V being a VRF system offering the benefits above, LG engineered specific perks that make these HVAC systems superior to others available to buy.

The LG Multi V family of products includes numerous units, and the brand calls attention to the high-tech inverters. They provide maximum efficiency at both full and partial loads.

Additionally, LG discusses the Multi V as a “total HVAC solution.” Many of the notable qualities of the system relate to its sensor technology.

For example, there is a dual sensing control that detects both the temperature and humidity in the environment and adjusts accordingly.

And, the data from the temperature and humidity sensors relates to a smart load control feature that manages the cooling load for increased energy efficiency based on the conditions.

There is also a Comfort Cooling setting. Once an operator activates it, the system transitions into a “mild cooling” mode without stopping to switch to the lower setting.

Suitable for the Smart Energy Trend

As mentioned earlier, some of the countries within the African and Middle Eastern markets set energy efficiency targets to meet within approximately the next decade. LG believes its Multi V technology will be instrumental in helping those nations reach their goals, particularly because it uses smart technology.

Smart HVAC systems collectively represent one of the top trends in the HVAC industry at large. Residential and corporate customers alike appreciate them since the intelligent aspects of such a setup offer benefits such as repair notifications that let users know when it’s time to make service calls.

Some units even schedule those appointments automatically. Also, sensors, like the ones LG incorporates into its units, enable self-regulation of HVAC units. They trigger the equipment regarding when and where to operate in a building.

Compatible With a Smart Energy Interface

Customers using a Multi V HVAC system can take advantage of a complimentary intelligent system called Building Energy Control, or BECON. There are reportedly several sites in the Middle Eastern and African regions using BECON for smart energy management. BECON is a cloud-based, Internet of Things (IoT) platform.

Its energy scan feature takes data from all the respective sensors and gives detailed energy usage statuses related to a building’s zones, floors or other parameters. It can also provide a future operation guide that instructs users on how to save energy while continuing to consider the comfort of the occupants.

BECON has diagnostic capabilities too. It looks at past and present data to spot abnormal patterns within it. The technology can also use that information to solve problems associated with equipment in a facility.

When BECON users want to see the impacts of various changes they could make to an HVAC system’s settings, BECON offers simulations that take things such as weather information, past usage and customer preferences about comfort versus efficiency into account.

Comfort and Conservation Combined

LG seems committed to offering its customers solutions that keep them comfortable in extreme temperatures without wasting energy. The Multi V is an excellent example of a system that incorporates several smart features that align with modern energy needs.

This system and others similar to it will likely continue to gain momentum, especially with a renewed focus on climate change mitigation and energy efficiency in many parts of the world.

Inside VRF HVAC Systems

At the heart of any building is its HVAC system—that essential collection of compressors, coils, fans, and controls that has such a hand to play in energy costs, air quality, and occupant comfort.

LG Air Conditioning Technologies understands this, and when it comes to perfecting all three, it’s hard to beat their LG MULTI VTM VRF series.

VRF—or Variable Refrigerant Flow—systems differ from traditional HVAC solutions in a few key ways. Most importantly, their fans and compressors run on inverter motors attached to computerized control systems, meaning their speed can be precisely controlled.

In essence, rather than merely flipping on and off like a typical AC unit, the inverter technology enables VRF systems to respond in real-time to changing conditions in a space and adapt accordingly.

“Imagine a time when you reached for your thermostat to shut off a blast of frigid air only to find the room too warm five minutes later.”

VRFs can even use heat recovered from one room to warm another, an ability that makes for particularly energy-efficient operations in hospitality settings and multi-family housing.

A VRF system is up to the task when it comes to pricing, VRF systems may initially appear more expensive, but when life-cycle energy savings and total building expenditures are taken into account, they quickly prove themselves to be the more affordable option.

Take, for example, the construction costs incurred by a chilled water system, which requires heavy structural steel and concrete in order to support, or the ductwork utilized by a simple rooftop system, which can take up two to three feet of space between each floor of a building.

By contrast, a typical refrigerant line used by a VRF is a mere two to three inches in diameter, allowing for significantly greater architectural flexibility.

With the superior performance, comfort, and energy savings VRFs offer, General Manager of the Air Solution Division, LG Electronics West African Operation, Mr. Jung June Yoon says they’re a bit like the Ferraris of the HVAC world—streamlined, powerful, and flawlessly engineered.


Kindly share this post

Dear Reader, Your support matters. But we believe that technology makes life more exciting and helps improve the lives of people around Nigeria and indeed the world. That is why, we have devoted our energy to independent reportage of technology and finance and how they affect lives. Our incisive and analytical view of how technology news affects the daily life help individuals and organizations make up their minds. Quality journalism costs money. Today, we're asking that you support us to do more. Kindly support our effort to deliver technology and finance journalism to everyone in the world. Donate as little as N1,000. Bank transfers can be made to: UBA Plc 1017156876 Communication Week Media Ltd

E-Business

Kaspersky Discovers Vulnerability in Qualcomm Snapdragon Chips that can Lead to Data Loss & Device Compromise

Published

on

Kindly share this post

Kaspersky ICS CERT discovered a hardware-level vulnerability affecting Qualcomm chipsets that are widely used in a range of consumer and industrial devices, including smartphones and tablets, car components, IoT devices and more.

The vulnerability resides in the BootROM – firmware embedded at the hardware level. Attackers could potentially get access to any data stored on the device or device sensors like camera and microphone, implement complicated attack scenarios and in some circumstances get full control of the device. The results of the research were presented at Black Hat Asia 2026.

The vulnerability affects Qualcomm MDM9x07, MDM9x45, MDM9x65, MSM8909, MSM8916, MSM8952 and SDX50 series and was reported to Qualcomm in March 2025. Qualcomm formally acknowledged the vulnerability in April 2025. It has been assigned a CVE-2026-25262. Other Qualcomm-based chips may be affected as well.

Kaspersky researchers explored the Sahara protocol, a low-level communication system used when a Qualcomm chip enters Emergency Download Mode (EDL) – a special recovery mode designed for repairing or restoring smartphones or other devices. Sahara acts as the first step that allows a computer to connect to the device and load software before the operating system on the device starts.

Kaspersky demonstrated that a security flaw in this process could allow an attacker with physical access to the target device to bypass key security protections in the chip, compromise the secure boot chain and, in some cases, deploy malicious applications and backdoors to the chip’s Application Processor, thus fully compromising the entire device.

For example, in cases when the target device is a smartphone or a tablet, the attacker can potentially get access to entered user passwords, and subsequently this opens further access to multiple types of sensitive user data, such as files, contacts, location, access to the devices’ camera and microphone, etc.

A potential attacker only needs a few minutes of physical access to a device to compromise it. Therefore, if a smartphone has been sent for repair or left unattended for a short time, one can no longer be sure it is not infected. Researchers warn that the threat extends beyond end-user scenarios to include potential compromise during the supply chain phase.

“Vulnerabilities like this may allow attackers to deploy malware that is difficult to detect and remove. In practice, this could enable covert data collection or influence device behaviour over extended periods of time.

“While a reboot might seem like an effective way to remove such malware, it cannot always be relied upon: compromised systems may simulate a reboot without actually resetting. In such cases, only a complete loss of power – including battery depletion – guarantees a clean restart,” comments Sergey Anufrienko, security expert at Kaspersky ICS CERT.

Kaspersky advises organisations and individual users to exercise strict physical security control over devices including at the supply, maintenance and decommissioning phases. A reboot of the device by cutting off the power supply to the affected chip (if available) or full battery discharge may help to get rid of the malware if it was installed.


Kindly share this post
Continue Reading

E-Business

Survey Shows Gaps in Cybersecurity Policies and Employee Commitment Leave Organisations Vulnerable

Published

on

Kindly share this post

A recent Kaspersky survey entitled “Cybersecurity in the workplace: Employee knowledge and behaviour”, showed that 39% of professionals in the Middle East, Turkiye and Africa (META) region, consider cybersecurity rules in their company to be excessive or not fully appropriate.

While 7% noted that their organisations do not have cybersecurity rules or that they are not aware of them. These results show a disconnect between corporate cybersecurity policies and employee commitment to these rules, underscoring the risks associated with shadow IT and unmanaged device usage in the workplace.

Shadow IT is defined as the use of unauthorised software, devices, or services without IT oversight, and it has evolved into a critical business risk. While often driven by employee productivity needs, it creates blind spots for IT departments.

The rise of hybrid work environments, increased reliance on cloud-based tools and the spread of AI tools have accelerated this trend. Without robust cybersecurity management and oversight, organisations face heightened exposure to ransomware attacks, data leaks, and regulatory penalties.

19% of survey respondents in the META region said there are no policies regarding the use of non-corporate devices in their company. 35% of employees admitted that they can use their own devices to access business information, provided they have some type of cybersecurity protection, even consumer-grade software.

On the positive side, 21% said they can use their own device, but these must first pass more stringent corporate IT security checks; while 25% of respondents indicated that only devices provided by the IT function can be used for work purposes.

The situation is significantly better with permissions for employees to install software on corporate devices without IT department’s approval. 50% reported that only IT specialists in their company are allowed to install software, while in 31% of organisations only top management or designated users can do so. 11% of employees can install software that is approved by the IT team. However, 8% of respondents said that all users can install any software they need without IT agreement in their organisation.

At the same time 21% of professionals surveyed acknowledged that within the past year they installed software on their work devices without IT supervision. That highlights a persistent shadow IT challenge that continues to expose organisations to security vulnerabilities, compliance risks, and data breaches.

“Shadow IT is now a mainstream operational risk. When one in five employees installs software without IT oversight, it signals a policy gap. Many organisations already have security policies in place, but employee perception must also be considered.

Organisations should move beyond restrictive controls and instead implement intelligent, user-centric cybersecurity strategies that combine strategies that integrate technology with employee awareness and responsible use,” said Toufic Derbass, Managing Director for the META region at Kaspersky.

 


Kindly share this post
Continue Reading

E-Business

Microsoft Faces £1.7Bn Cloud Lawsuit in UK over Alleged Market Abuse

Published

on

Kindly share this post

Microsoft is facing a £1.7 billion ($2.3 billion) class action lawsuit in the United Kingdom over allegations that it abused its dominant market position in cloud computing.

Microsoft Faces £1.7bn Cloud Lawsuit in UK Over Alleged Market Abuse

Microsoft

The case, filed before the Competition Appeal Tribunal, was brought by Maria Luisa Stasi on behalf of about 59,000 British businesses and organisations. It alleges that Microsoft unfairly imposed higher costs on customers running its Windows Server software on rival cloud platforms.

Stasi said the company’s practices have had a significant financial impact on both public and private sector organisations over several years.

In allowing the case to proceed, the tribunal ruled that it has a “reasonable prospect of success.” The judges noted that Microsoft is alleged to have abused its dominance in the paid server operating system market to undermine competition in the cloud services space.

If the claim succeeds, compensation for affected organisations is estimated to range between £1.7 billion and £2.1 billion.

Microsoft has rejected the allegations and confirmed it will appeal the ruling. A company spokesperson said the decision does not represent a final judgment on the claims and that it disputes the substance of the case.

The lawsuit comes as regulators in the UK and the European Union intensify scrutiny of Microsoft’s cloud business practices. UK authorities are currently assessing whether the company should be designated as having “strategic market status,” a move that would subject it to stricter competition rules.


Kindly share this post
Continue Reading

Trending